Products

Fibreglass (F.R.P.) Base Frames

RHINOTUFF F.R.P. Base Frames are used for mounting of Turbo Fans and are manufactured using the best quality raw material. 

U.V. stable Resin is used for moulding of F.R.P. Base Frames and as a result these do not degenerate (become yellow and brittle) rapidly when in contact with sunlight for a long period of time.

The F.R.P. Base Frames are highly durable and have a service life of more than 10 years.

The F.R.P. Base Frames have a sizable opening at their base to facilitate rapid exhaust of large volumes of hot stale air. Their aerodynamic design helps create a natural draft and give a boost to the thermal convection currents, which in turn enhance the operational efficiency and performance of the Turbo Ventilator Fans.

The Base Frames have a Venture Dome, which is pyramid shaped. The Base Frames are provided with design features such as anti-capillary groove, baby ribs, stiffening (connecting) ribs, circular support collars. Adequate provision is made to facilitate rapid drainage of rain water.

The Base Frames help counter the roof’s slope and help keep the Fans upright and perpendicular to the ground on most roofs.

The Base Frames can be manufactured in a wide range of corrugations & profiles and are adaptable to most roofs.

F.R.P. Base Frames can be coloured opaque or transparent. The transparent F.R.P. Base Frames allow natural light to pass through them and thereby providing limited illumination in the place of their installation. These help conserve precious energy meant for artificial lighting.

These can be made anti corrosive and fire resistant, if need be.

Salient Features:

  • Mechanically strong
  • Impact resistant
  • Light weight and therefore easy to handle and install
  • Weather & storm proof
  • Leakage proof
  • Can be transparent
  • Maintenance free
  • Highly durable
  • Easy to repair in case of an accidental damage
  • Adaptable to any kind of roofing material
  • Can be made anti corrosive, fire retardant & high temperature resistant
  • Can be made available in a wide range of corrugations and profiles & in different sizes
 

SeriesRHINO STAR

Model Size Corrg. / Profile Transp.Level M.O.C.
Venture Dome Dia Length Breath Venture Dome Height (Max.) Exhaust Opening Wall Thickness
FRP 530 (21’’)
530 MM
1.60 Mtr., 1.70 Mtr., 1.80 Mtr. or any other 1.05 Mtr. - 1.22 Mtr. 0.45 Mtr. 1.00 Mtr. x 0.70 Mtr. 2.00 MM / 3.00 MM or any other Any 70.00% Non U.V.F.R.P.
FRP 560 (22’’)
560 MM
1.60 Mtr., 1.70 Mtr., 1.80 Mtr. or any other 1.05 Mtr. - 1.22 Mtr. 0.45 Mtr. 1.00 Mtr. x 0.70 Mtr. 2.00 MM / 3.00 MM or any other Any 70.00% Non U.V.F.R.P.
FRP 560 (24’’)
600 MM
1.60 Mtr., 1.70 Mtr., 1.80 Mtr. or any other 1.05 Mtr. - 1.22 Mtr. 0.45 Mtr. 1.00 Mtr. x 0.70 Mtr. 2.00 MM / 3.00 MM or any other Any 70.00% Non U.V.F.R.P.

SeriesRHINO SUPER STAR 

Model Size Corrg. / Profile Transp.Level M.O.C.
Venture Dome Dia Length Breath Venture Dome Height (Max.) Exhaust Opening Wall Thickness
FRP 530 (21’’)
530 MM
1.60 Mtr., 1.70 Mtr., 1.80 Mtr. or any other 1.05 Mtr. - 1.22 Mtr. 0.45 Mtr. 1.00 Mtr. x 0.70 Mtr. 2.00 MM / 3.00 MM or any other Any 70.00% U.V. Stable F.R.P.
FRP 560 (22’’)
560 MM
1.60 Mtr., 1.70 Mtr., 1.80 Mtr. or any other 1.05 Mtr. - 1.22 Mtr. 0.45 Mtr. 1.00 Mtr. x 0.70 Mtr. 2.00 MM / 3.00 MM or any other Any 70.00% U.V. Stable F.R.P.
FRP 560 (24’’)
600 MM
1.60 Mtr., 1.70 Mtr., 1.80 Mtr. or any other 1.05 Mtr. - 1.22 Mtr. 0.45 Mtr. 1.00 Mtr. x 0.70 Mtr. 2.00 MM / 3.00 MM or any other Any 70.00% U.V. Stable F.R.P.

QUICK ENQUIRY

Enquire Now